? coilcraft, inc. 2005 specifications subject to change without notice. please check our website for latest information. smt power inductors - lpo2506 series document 208-1 document 208-1 revised 07/09/03 with an above-board height of just 1,19 mm, this is our thinnest power inductor series, perfect for pc card or other low profile applications. the lpo2506 comes in two styles. one is a standard on-board design that is 1,65 mm high. the second uses coilcraft?s inboard ? technology. by dropping the inductor core through a hole in the circuit board, the above-board height is reduced to 1,19 mm. (custom designs can reduce this even further to a maximum of 0,9 mm, depending on board thickness.) coilraft designer?s kit c132 contains samples of all in- board values shown; kit c133 contains all on-board values. to order, contact coilcraft, or purchase them on-line at http://order.coilcraft.com . in-board style on-board style l 20% 1 dcr max srf typ i sat 2 i rms 3 part number part number (h) (ohms) (mhz) (a) (a) lpo2506ib-472 lpo2506ob-472 4.7 0.145 90 1.6 1.9 lpo2506ib-682 lpo2506ob-682 6.8 0.165 75 1.3 1.7 lpo2506ib-103 LPO2506OB-103 10 0.240 60 1.0 1.5 lpo2506ib-153 lpo2506ob-153 15 0.300 45 0.90 1.3 lpo2506ib-223 lpo2506ob-223 22 0.420 35 0.70 1.0 lpo2506ib-333 lpo2506ob-333 33 0.550 30 0.60 0.90 lpo2506ib-473 lpo2506ob-473 47 0.765 22 0.50 0.70 lpo2506ib-683 lpo2506ob-683 68 1.10 20 0.40 0.60 lpo2506ib-104 lpo2506ob-104 100 1.60 15 0.30 0.50 lpo2506ib-154 lpo2506ob-154 150 2.50 12 0.25 0.40 lpo2506ib-224 lpo2506ob-224 220 3.65 10 0.22 0.32 lpo2506ib-334 lpo2506ob-334 330 4.65 8.0 0.18 0.28 lpo2506ib-474 lpo2506ob-474 470 6.75 6.5 0.14 0.24 lpo2506ib-684 lpo2506ob-684 680 9.15 5.5 0.12 0.20 lpo2506ib-105 lpo2506ob-105 1000 14.20 4.5 0.10 0.16 1. tested at 100 khz, 0.1 vrms, 0 adc. 2. dc current at which the inductance drops 10% (typ) from its value without current. 3. average current for a 40c rise above 25c ambient. 4. operating temperature range -40c to +85c. 5. electrical specifications at 25c. see qualification standards section for environmental and test data.
? coilcraft, inc. 2005 specifications subject to change without notice. please check our website for latest information. smt power inductors - lpo2506 series document 208-2 revised 12/14/02 document 208-2 typical l vs frequency typical l vs current on-board style in-board style terminations: platinum/palladium/silver tape and reel: 1000/13 reel 16 mm tape width for packaging data see tape and reel specifications section.
|
